If you’re having difficulty closing your frameless glass shower door, it could be more than just annoying– a door that won’t close all the way might lead to water all over the bathroom floor (which means less privacy too).
Not to worry: we’ve got some simple fixes that should take care of it in no time flat. Make sure to follow these instructions closely to fix frameless glass shower door not closing properly!
Discover how you can fix a shower door that refuses to close with our tips- and restore serenity to your bathroom. If you do need professional repairs, don’t forget Anderson Glass & Mirrors is only a phone call away! More details below.
What Causes a Frameless Glass Shower Door to Not Close Properly?
Before we move on to the more important stuff about how to fix frameless glass shower door not closing properly, let’s look at why this problem occurs!
There are various possible causes of the failure of your frameless glass shower door to close completely. Consider the following possible reasons:
- It is possible that the hardware is not properly fixed. Inspect screws of hinges, handles, and latches.
- There can be accumulations of grime in areas such as door tracks, seals or hinges.
- If it’s out of alignment with the shower enclosure, something might be hitting it or it might not be level because the walls are uneven.
- With time, door sweeps and seals become ineffective and so prevent a perfect seal when the door closes.
- The hinges may also deteriorate due to their use hence making the door to hang slightly rather than vertically up and down.
- Perhaps the door was not installed properly from the beginning— you wouldn’t believe how many times fitters get it wrong!
Ensure quick resolution of these problems to prevent further harm and guarantee your safety while showering.
How to Fix a Frameless Glass Shower Door Not Closing Properly?
Now that we know the reasons behind improper closing of a glass shower, let’s learn how to fix a frameless glass shower door not closing properly!
What You’ll Need
Before we begin on how to fix a frameless glass shower door not closing properly, you’ll need some necessary tools like:
- Screwdriver (Phillips and flathead)
- Allen wrench set
- Level
- Rubber mallet
- Replacement seals
- Lubricant spray
- Soft cloths
Next, let’s look for problems one by one and try to eliminate them!
a. Check for Alignment
If your frameless glass shower door fails to close properly, the reason could be that it is out of alignment.
You can determine this by opening and closing the door slowly. Does the space on one side differ from the other at the top or bottom?
Or perhaps, does the door make some kind of contact with the floor while closing? If yes, then it requires some alignment!
b. Adjust the Door Hinges
If you need to align frameless shower doors that open in the middle, first check for adjustment screws on the hinges.
To make the door level, turn these screws with an Allen wrench. For swing-open doors, loosen the screws at the point where the door pivots.
The door should move freely back and forth with these screws slightly undone. If not, try turning them a little bit more- but don’t forget to tighten everything up again before finishing!
c. Check for Loose Screws
It is common for the screws in handles and hinges to loosen over time, which can prevent your shower door from closing properly.
Take a screwdriver and tighten any loose screws; if they don’t turn easily, try loosening them slightly before tightening again to improve movement and ensure a secure fit.
(Note: If you need a quick fix to a frameless glass shower door not closing properly, then checking for loose screws first could be a great option).
d. Replace Seals if Necessary
When frameless glass shower doors don’t close properly, worn or misaligned seals are often the culprit.
To replace them, simply take out the old seal and clean the area with a soft cloth before putting in the new seal snugly.
If you find that your seals still aren’t sitting right after this, experiment with different placements— it could just need adjusting!
e. Adjust the door sweep
When your shower door is shut, the door sweep stops water leaks. If the door does not close completely, the sweep may be out of position.
Move it with screws or clips so that the door closes tightly and no water drips out.
Regular Maintenance Can Help Solve Future Issues
If you want your custom frameless shower enclosure working well, you need to look after it– a stitch in time can save nine! Regular maintenance tasks like these can help solve future issues:
- Clean the door and hinge weekly so that there’s no hardened soap residue. If scum builds up it’ll stop the door closing properly.
- Once a month, oil the hinges. This is important; don’t skip it if you want everything to carry on working smoothly without any wear-and tear problems from friction.
- Every few months, check the seals of your shower door. If there are any gaps or cracks, replace them. Seals help prevent water from leaking.
- Quarterly, inspect screws: They should feel tight and secure. Loose screws can affect how well the door closes—and its stability.
If you make these easy maintenance tasks part of your regular routine, you’ll be able to avoid any future problems with your frameless glass shower door not closing properly.
Anderson Glass & Mirrors Can Help!
To sum it up, don’t worry if you are facing the irritating issue of a frameless glass shower door not closing properly– Anderson Glass & Mirrors can help!
They’ve been serving the DMV area for over 15 years and have lots of experience with these issues.Don’t let your faulty door mess up your daily routine any longer: Try them tips for quick fixes, or get in touch with them to learn more about their services!
